Stainless Steel Tanks

The Water Tanker with double axle trailer driven by Tractor as Prime Mover is used to transport water from one location to the other location which can be further used for Firefighting, Household, Industrial supply purposes. Water tank capacity In Liter ‰5000 Actual water tank capacity In Liter 5000 liter Water Tank Water Tank Material Stainless Steel 304 Water Tank of Stainless Steel / MS Water tanker made with 3.15mm or more thick MS or Stainless steel treated with anti-corrosion coating, which is dully fastened and mounted on the trailer chassis with proper load distribution, with suitable baffles. Actual Thickness of MS / SS Sheet used for fabrication of Water Tanker in mm 3.15 millimeter Number Of Baffles Plates in the tank for MS and SS 2 Actual Thickness of GRP used for fabrication of Water Tanker in mm 6 millimeter Number Of Baffles for GRP Tank 2 Water Tanker Mountings The water tank will be mounted on the trailer subframe using Rubber Metacones. The rubber metacones shall facilitate to absorb the jerks and bending torsions in expansion as well as compression mode without high deflection. Covered Manhole Diameter In mm (Minimum) 450 Diameter Of Cleaning Hole At Bottom Of Tank In mm (Minimum) 250 Outlet Suitable outlet of 63mm diameter with NB Class Nipple made of water tank material is provided at the rear with suitable ball value. Ladder provision on the back side of the water tanker No Trailer Type of Trailer Balanced Trailer (Double Axle) Type of Platform Tipping Platform Capacity of Trailer (tonnes) 5 tonne Type of Axle Assembly Double Axle (Load carrying capacity upto 10 Tonne) Axle Assembly Wheel Track (mm) 1500 Number of Wheels 4 Operating pressure (in Mpa) of hydraulic ram in case of tipping type 0 Tipping angle of body (in degrees), In case of tipping type NA Overall width of trailers between extreme points (meter) 2.5 meter Overall length of platform 6.7 meter Overall height of trailers with tyre inflated from the supporting surface(ground) to top of platform (meter) 1.5 meter Overall height of trailers with tyre inflated from the supporting surface(ground) to sideboard (meter) 2.2 meter Ground Clearance (mm) 300 meter Material used for fabrication of trailer as per Clause-5, Table-1 of IS:8213 (latest) Yes Recto Reflective Marking (tapes) as per AIS - 090 Yes Lighting and Lighting -signalling device as per AIS- 062 Yes Trailers shall be fitted with Rear Under Run Protective Device (RUPD) confirming to IS 14812 (latest) Yes Trailers shall have service and parking brake as per AIS- 043 No The Trailers shall be fitted with pneumatics tyres and rims of suitable size confirming to IS 13154 (latest) and IS 10694 (latest) Yes ISI marked ISMC channel used for fabrication of Chassis and frame mounting on chassis Yes Type of spring suspension system (as per IS:1135) MA No of spring leaves plates fitted (Nos) 2 Single telescopic cylinder as per IS:12371 (latest) NA Lashing hooks for towing down load Yes No of Hooks 2 Type of Towing Device TRAILER Certification Conformity to standards IS 8213 (latest) fo